Best Practices On Using A Wetsuit Cleaner

By Pamela Scott


In order to extend the life of a wetsuit, crucial precautionary measures should be observed around the clock by the user. This is basically because of its use. These precautions will go a long way in increasing its effectiveness. The recurrent maintenance expenses may be a bit high but the benefits are worth the sacrifice. This maintenance will help avoid adverse effects like shrinking and tearing off when in use. For you to benefit from a wetsuit cleaner, you need to observe the following guidelines.

There are many ways to safeguard wetsuits from being tattered. These range from cleaning to storing the garments in a recommended wardrobe. This keeps the suits in good condition and comfortable to wear. Rinsing a wetsuit can go a long way to improving its efficiency. The cleaner should ensure that both inside and outside of the garment are thoroughly each time you use it. This helps to remove any chlorine or salty water. Chlorine and salt are corrosive agents which degrade and discolor many materials.

Soak the suit in a bathtub or any deep container you may have for about half an hour. This loosens dirt and makes the wetsuit easy to clean. Wash it by rubbing the garment against itself repeatedly. This simple act ensures that sensitive areas of the clothing are thoroughly cleaned. These areas include the collar parts which accumulate a lot of sweat.

In addition, it should always be kept in a well air-conditioned place. This moderates the temperatures and making sure that they do not exceed the recommended levels. It is important to note that high temperatures can cause the fabric to lose its firmness, thereby affecting its performance. This should, therefore, be highly monitored.

Take time to inspect your suit on a daily basis after use. This is to identify any tears along the seams. If they exist a necessary action should be taken before it is cleaned. For tears and gouges re-sewing with a heavy nylon thread or repairing it with wetsuit cement respectively will help fix the problem. On the contrary, stitching small holes causes leaks. This, therefore, requires that only blind stitching method should be used to avoid this problem. Alternatively, consider flatlock stitches to repair it well.

Use strong sweat removing detergents like shampoo. When a quality scented shampoo is sprayed on the wetsuit it makes it fragrant and free from bad smell. It also removes dark spots and salt traces which may remain on the zipper after thorough rinsing. It also saves the garment from discoloration by acting as a conditioner that retains the original shade of the fabric.

During washing, both the inside and outer parts should be thoroughly cleaned. Then drying should be done inside-out first before drying the outside. This should be done in a cool shade to avoid the disastrous effects of UV rays from the. The radiations from the sun make the fabric to weaken and fade easily which gives it a bad appearance.

The use of odor eliminating agents such as Mizaryme and Listerine should be used in considerable amounts. This aids in making sure that bad smells due to the accumulation of sweat and body dirt are removed. Your wetsuit will then remain fresh and ready for use. Thorough cleaning of a diving suit removes bacteria that can cause bad odors and deterioration of the fabric.




About the Author:




EmoticonEmoticon